Onkyo R-801A - Manual (Page 41)

41
If you select an input source that is not
connected to the R-801A, the power is
turned on to the unit at the programmed
time and the input source is switched, but
nothing will happen.
5
Press the STANDBY/ON button on this
unit to set the Standby mode.
Notes
• After you set the timer and the unit is in
Stand-by Off mode, pressing the ENTER
button turns off the display indicator.
• The clock of this unit must be set correctly
before programming the timer.
• Make sure that the specified source com-
ponent is connected to this unit, and that
the CD, MD, CDR, or cassette tape has
been inserted into the appropriate com-
ponent.
REC mode of the Timer function enables you
to record a specified source at a specified
time.
Note
To perform timer recording to a mini disc,
you need to use an MD recorder that fea-
tures the
mark, such as the MD-101A.
1
Press the TIMER button repeatedly
until “REC OFF” appears on the dis-
play, then press the ENTER button.
2
Press the or button to select
the day of the week or “EVERYDAY”
for recording, and press the ENTER
button.
Notes
• You can select “NEXT” instead of the day
of the week. If you do so, recording will
start at the next occurrence of the indi-
cated time.
• If you select “EVERYDAY,” timer record-
ing will start at the designated time
everyday. (This is useful when you wish to
record a daily radio program show.)
STANDBY/ON REPEAT
STANDBY/ ON
TAPE
TAPE REW TAPE FF
SLEEP TIMER ENTER CLOCK
MODE
CLEAR
SCROLL
CDR/PC
CD/ DVD MD FM AM
ACOUSTIC PRESENCE
INPUT SELECTOR
TAPE
CDR/PC
CD/DVD
MD
VOLUME
MUTING
7 8
9 10/0
4
5 6
2 3 1
--/---
UP
DOWN
TIMER
ENTER
,
DISPLAY
R- 8 01A
STANDBY / ON
STANDBY
INPUT
ACOUSTIC PRESENCE
TUNING MEMORY FM MODE
CLEAR PHONES
TUNER AMPLIFIER
VOLUME
Programming to record at a spec-
ified time
STANDBY / ON
STANDBY Lit
TIMER
ENTER
NEXT SUN MON TUE WED
EVERYDAY SAT FRI THU
ENTER