Onkyo R-801A - Manual (Page 39)

39
You can define or change which day is WEEK-
DAY or WEEKEND. You can also define the day
as both WEEKDAY and WEEKEND in order to
program two timer settings on the same day.
The initial factory settings are:
WEEKDAY : Monday – Friday
WEEKEND : Saturday and Sunday
1
Press the TIMER button repeatedly
until “DAY SET” appears on the dis-
play, then press the ENTER button.
2
Press the or button to select
“WEEKEND” or “WEEKDAY”.
“END” or “DAY” flashes.
3
Press the ENTER button.
The current WEEKDAY or WEEKEND set-
ting will be displayed.
4
Press the ENTER button repeatedly to
display the flashing bar cursor of the
day you wish to select, or simply press
the corresponding number buttons.
The number button on the remote con-
troller:
1:S (Sunday)
5:T (Thursday)
2:M (Monday) 6:F (Friday)
3:T (Tuesday) 7:S (Saturday)
4: W (Wednesday)
Note
To use the number buttons, select the 24-
hour display. If you select the 12-hour dis-
play, you cannot use the number buttons to
set the day.
5
Press the or button to display
the desired day of the week, and
press the ENTER button.
Pressing the or button repeat-
edly toggles between the day indication
and the bar cursor (.....).
6
Press the ENTER button repeatedly to
display the flashing character or bar
cursor at the right end and press the
ENTER button, the unit completes the
setting.
After you set the timer while the unit is in
Stand-by Off mode, pressing the ENTER
button turns off the display indicator.
REPEAT
STANDBY/ ON
TAPE
TAPE REW TAPE FF
SLEEP TIMER ENTER CLOCK
MODE
CLEAR
SCROLL
CDR/PC
CD/ DVD MD FM AM
ACOUSTIC PRESENCE
INPUT SELECTOR
TAPE
CDR/PC
CD/DVD
MD
VOLUME
MUTING
7 8
9 10/0
4
5 6
2 3 1
--/---
UP
DOWN
TIMER
ENTER
,
Number buttons
Changing the WEEKDAY and
WEEKEND settings
Sunday
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
TIMER ENTER
ENTER
ENTER