Using the timer, Timer setting modes, Timer enter number buttons – Onkyo R-801A User Manual
Page 38
38
Using the timer
The R-801A features a Timer function that enables you to start playing or recording a specified
component at a specified time. To use this function, you need to connect this unit to other
components via
REMOTE CONTROL jacks. Refer to “Connecting the
connectors and
AC OUTLETS” through “Connecting the
remote control cables” on pages 12 – 15 for more
information on making the connections. The timer function can be performed only by using
the remote controller.
Notes
• You can use only the
,
, TIMER,
ENTER, and number buttons for the timer
setting. If you use the other buttons, the
timer will not be set correctly.
• The explanation in this section assumes
that the unit has been powered on (set to
“Standby On”).
The following buttons and setting modes are
used to operate the Timer function.
TIMER button
Use this button to select a timer mode. The
timer mode will change each time you press
this button.
/
buttons
Use these buttons to select the details of the
mode or to change values.
ENTER button
Use this button to enter the selected mode
or numbers.
Timer setting modes:
• W.DAY (WEEKDAY): This mode enables
you to listen to a specified component at
a designated time on weekdays. You can
change the day of the week in DAY SET
mode.
• W.END (WEEKEND): This mode enables
you to listen to a specified component at
a designated time on weekends. You can
change the day of the week in DAY SET
mode. You can define the same day of
the week as both WEEKDAY and WEEK-
END. To set two programs for one day,
specify the same day of the week as
WEEKDAY and WEEKEND and se the time
for each program.
• REC: This mode enables you to record
your favorite broadcasting program(s)
starting at a designated time. You can
select from NEXT, the day of the week,
and EVERYDAY. Except for EVERYDAY, the
unit performs the timer recording once at
the designated time.
• DAY SET: This mode enables you to
change the day setting (definition) of
WEEKDAY or WEEKEND.
• ADJUST: This mode enables you to set
and adjust the clock.
If you have adjusted the clock, you do not
need to set it again.
Buttons and modes for the Timer function (remote controller only)
REPEAT
REMOTE CONTROLLER RC-
466S
STANDBY/ ON
TAPE
TAPE REW
TAPE FF
SLEEP
TIMER
ENTER
CLOCK
MODE
CLEAR
SCROLL
CDR/PC
CD/ DVD
MD
FM
AM
ACOUSTIC
PRESENCE
INPUT SELECTOR
TAPE
CDR
CD/DVD
MD
VOLUME
MUTING
7
8
9
10/0
4
5
6
2
3
1
--/---
UP
DOWN
TIMER
ENTER
Number
buttons