Display, Front & rear panels —continued – Onkyo TX-NR5007 User Manual
Page 10
10
SETUP MIC jack (62)
Audyssey MultEQ
®
XT Room Correction and
Speaker Setup microphone connects here.
USB port (127)
A USB mass storage device, such as a USB flash
drive or MP3 player, containing music files can be
plugged in here and the music selected can be
played through the AV receiver.
AUX 1 INPUT (42)
This input can be used to connect a camcorder,
game console, and so on. There are jacks for com-
posite video, analog audio, and optical digital audio.
AUX 1 INPUT HDMI (31)
Used to connect an HD camcorder etc.
Up [
] and Down [
Used to adjust the tone (bass and treble) for the
main room and the volume, tone and balance for
Zone 2 or Zone 3.
DISPLAY button (68)
This button is used to display various information
about the currently selected input source.
POWER switch (48)
(European and Asian models)
This is the main power switch. When set to OFF,
the AV receiver is completely shutdown. It must be
set to ON to set the AV receiver to On or Standby.
For detailed information, see the pages in parentheses.
Speaker/channel indicators
Indicate the speaker channels used by the current
listening mode.
The following abbreviations indicate which audio
channels are outputted for the current listening
mode.
Z2 indicator (136)
Lights when Powered Zone 2 is being used.
A and B indicators (70)
Indicate which speaker set is selected: A or B.
Z3 indicator (136)
Lights when Powered Zone 3 is being used.
Listening mode and format indicators (81)
Show the selected listening mode and audio input
signal format.
Audyssey (61, 98):
Flashes during Audyssey MultEQ
®
XT Room Cor-
rection and Speaker Setup. Lights when the “Equal-
izer Settings” is set to “Audyssey” or
Audyssey Dynamic Surround Expansion™ listen-
ing mode is selected.
Dynamic EQ (102):
Lights when “Dynamic EQ” is enabled.
Vol (102, 118):
Lights when “Dynamic Volume” is enabled.
Lights when “Dolby Volume” is enabled.
NETWORK indicator (121)
Lights when the Net input selector is selected.
Display
LW:
Front wide left
LH:
Front high left
RH:
Front high right
RW: Front
wide
right
FL:
Front left
C:
Center
FR:
Front right
SL:
Surround left
SW:
Subwoofer (Low Frequency Effects)
SR:
Surround right
SBL: Surround back left
SB:
Surround back
SBR: Surround back right