Onkyo TX-NR5007 - Manual (Page 118)

118
Advanced Setup
—Continued
Re-EQ Function
With the Re-EQ function, you can compensate a soundtrack whose high-frequency content is too harsh, making it
more suitable for home theater viewing.
Re-EQ Off: Re-EQ Function off (default).
On: Re-EQ Function on.
This function can be used with the following listening modes: Dolby Digital, Dolby Digital Plus,
Dolby TrueHD, Multichannel, DTS, DTS-HD High Resolution Audio, DTS-HD Master Audio, DTS Express,
DSD, Dolby EX, Dolby Pro Logic IIz Height, Dolby PLIIx Movie, Neo:6 Cinema, 5.1-channel source + Neo:6,
and Neural Surround.
Re-EQ(THX) Off: Re-EQ (THX) Function off.
On: Re-EQ (THX) Function on (default).
This function can be used with the following listening modes: THX Cinema, THX Surround EX, and
THX Ultra2 Cinema.
Note:
Settings for the Re-EQ function are kept in each listening mode. However, in THX listening mode, when the
AV receiver is turned off, it will return to “On”.
Audyssey Dynamic Volume™
Dynamic Volume See “Dynamic Volume” of “Audio Adjust” on page 102.
Note:
If you would like to use Audyssey Dynamic Volume™ in THX listening modes, set “Loudness Plus” setting to
“Off” and set “Preserve THX Settings ” setting to “No”.
Dolby Volume
Dolby Volume Off: Dolby Volume off (default).
Low: Low Compression Mode becomes active.
Mid: Medium Compression Mode becomes active.
High: High Compression Mode becomes active. This setting affects volume the
most, causing all sounds to be of equal loudness.
Notes:
• When the “Dolby Volume” setting is set to effective, Audyssey Dynamic EQ™ and
Audyssey Dynamic Volume™ will be set to “Off” from “Audyssey” and “Equalizer” setting will be set to
“Off” or remain set to “Manual”.
• If you would like to use Dolby Volume in THX listening modes, set “Loudness Plus” setting to “Off” and set
“Preserve THX Settings ” setting to “No”.
Music Optimizer
The Music Optimizer function enhances the sound quality of compressed music files. Use it with music files that use
“lossy” compression, such as MP3. The setting is stored individually for each input selector.
Music Optimizer Off: Music Optimizer off (default).
On: Music Optimizer on.
Note:
The Music Optimizer function only works with PCM digital audio input signals with a sampling rate below
48 kHz and analog audio input signals. The Music Optimizer is disabled when the Direct or Pure Audio listen-
ing mode is selected.