Quadra-Fire QV36DC-A - Manual (Page 24)

Quadra-Fire • QV36DC-A • 2161-900 Rev. C • 6/09 27
Step 4. Positioning, Leveling, and
Securing the Fireplace
• Place the fi replace into position.
• Level the fi replace from side to side and from front to
back.
• Shim the fi replace with non-combustible material, such
as sheet metal, as necessary.
• Secure the fi replace to the framing by nailing or screw-
ing.
!
!
The diagram below shows how to properly position,
level, and secure the fi replace.
Figure 31. Proper Positioning, Leveling, and
Securing of a Fireplace
Figure 32. Gas Control System
STANDING PILOT
Step 5. The Gas Control System
WARNING: THIS UNIT IS NOT FOR USE
WITH SOLID FUEL.
The type of gas control system used with this model is
Standing Pilot Ignition.
Standing Pilot Ignition System
This system includes millivolt control valve, standing pilot,
thermopile/thermocouple fl ame sensor, and piezo ignitor.
WARNING: 110-120 VAC MUST NEVER BE
CONNECTED TO A CONTROL VALVE IN A
MILLIVOLT SYSTEM.
AILING TABS
BOTH SIDES)