Toshiba 6F3B0253 - Manual (Page 61)

6F3B0253
Basic Hardware and Function
59
4. Installation and Wiring
4.5 Power supply wiring
Wire the power source to the T1-16S power supply terminals.
Insulation
transformer
Line filter
Power source
T1-16S
•
Power conditions:
AC power supply type DC power supply type
Rated voltage 100 to 240Vac, +10/-15% 24Vdc, +20/-15%
Frequency 50/60Hz,
±
5% -
Power consumption 45VA or less 18W or less
Retentive power
interruption Continuous operation for less than 10ms
•
1.25mm
2
(16 AWG) twisted-pair cable should be used for the power cable.
•
The power cable should be separated from other cables.
! CAUTION
1. Turn off power before wiring to minimize the risk of electrical shock.
2. Applying excess power voltage to the T1-16S can cause explosion or
fire. Apply power of the specified ratings described below.