Toshiba ICC Multiprotocol Ethernet Interface ASD-G9ETH User Manual
Page 19
18
ICC
EIP Network Status / Profinet IO Connection Status: When the multi-
protocol firmware image (with Ethernet/IP support) is loaded, this LED conforms
to the prescribed “network status LED” behavior as dictated in the Ethernet/IP
specification, Volume 2, Chapter 9. When the Profinet IO firmware image is
loaded, this LED is on solid green when the controller has established a link
with the interface board and is communicating with it.
Ethernet Activity: Blinks green briefly when network packets are sent or
received.
Heartbeat: Blinks green to indicate communication between the interface card
and the drive. Contact ICC technical support if a blinking red error code is
observed.
6.2 Ethernet Jack
The Ethernet jack also contains two embedded LEDs.
Reserved
Ethernet Link
Ethernet Link: This amber LED is lit whenever a viable Ethernet network is
connected to the port.
Reserved: This green LED is currently unused and is therefore always OFF.