Toshiba ICC Multiprotocol Ethernet Interface ASD-G9ETH - Manual (Page 73)

72
ICC
3) Add an XIO element to the main program.
a) Right click on the ladder logic rung containing the MSG instruction in
the MainRoutine window and select “Add Ladder Element...” again.
b) The “Add Ladder Element” window appears.
c) Select the “XIO” element in the Bit folder. Refer to Figure 70.
d) Click OK.
Figure 70: Adding an XIO Element
4) Configure the MSG instruction.
a) Edit the “Message Control” field on the MSG instruction to use the
previously-created “connection” tag. Refer to Figure 71.
Figure 71: MSG Instruction Tag Assignment
b) Click the message configuration button (“…”) in the MSG instruction.
The “Message Configuration” window will open. Refer to Figure 72.
c) “Configuration” tab settings: