Texas Memory Systems 325 - Manual (Page 16)

2. In a RamSan-320/325, the front
panel displays “Restoring Data”
and cycles between a progress
bar and an estimated time until
completion. Administrators may
use this to determine how much
time before the system is on-line.
This information is also available
through the Text Management
Interface. This process will take
approximately 12 minutes for a
fully loaded system.
If all system LUNs are set to
Volatile mode, the front panel
displays “Initializing” instead of
“Restoring Data.”
3. Once the system has restored
data, the front panel displays
“System Status: GOOD” and
shows the performance bars for
each Fibre Channel port. The
numbers represent the Fibre
Channel Controllers. If a
controller is not installed, the
number and corresponding
performance will not display. The
top bars represent the port A and
the bottom bars represent port B.
Restoring Data ... 73.8%
Restoring Data ... 73.8%
Est. Time Left
04:03
System Status: GOOD
1==- 2=-- 3- 4===
The system is now ready for normal operation.
RamSan-300/320/325 User’s Manual - 12 -