Texas Memory Systems 325 - Manual (Page 99)

To change the system location:
• Select “Change the system location”
• Enter the system location and press [ENTER]
To change the system contact name:
• Select “Change the system contact”
• Enter the system contact and press [ENTER]
All modifications are visible at the top of the menu.
To save any changes:
• Select “Save changes and exit”
Via Web Management
To update community information via the Web Management
Interface:
• Click on the “Management Control Processor” graphic.
• Click on the “SNMP” tab.
• Enter the appropriate community values.
• Click the “Save” button.
Figure 8-2: SNMP configuration screen
RamSan-300/320/325 User’s Manual - 95 -