Texas Memory Systems 325 - Manual (Page 80)

6.6 Resizing LUNs
The Text Management Interface makes it possible to change the LUN
sizes. The configuration utilities allow you to both increase and decrease
the size of the currently configured LUNs, to make room for more LUNs, or
to ensure that the system is using all available space.
6.6.1 Via Web Interface
To resize the LUNs via the Web Management Interface:
• Click on the “Management Control Processor” graphic.
• Click on the “LUN Config” tab.
• Select the LUN to edit by clicking on the LUN graphic.
• Click the “Modify LUN” button.
• Select the size from the “LUN Size” scroll bar.
• Click the “OK” button.
6.6.2 Via Text Management
• From the Telnet Main Menu, select “LUN Setup”
• Select “Modify LUN(s)”
• Select LUN (See instructions in Section 6.5 )
• Select “Resize LUN”
• Enter the new LUN size in MB and press [ENTER].
• Select “Exit to the LUN configuration menu”
• To save the changes once you have completed all LUN
configuration, select “Save changes and exit”
The system does not allow entering a LUN size greater than the
remaining available space. If you attempt this, the system
displays an error message and does not save your changes.
RamSan-300/320/325 User’s Manual - 76 -