Texas Memory Systems 325 - Manual (Page 76)

6.3.2 Via Text Management
To view the LUN map via Text Management Interface:
• From the Telnet Main Menu, select “LUN Setup”
• Select “Print detailed LUN map”
• Select “All LUNs” or a specific LUN.
Figure 6-7: LUN Map Screen
The LUN map, see Figure 6-7: LUN Map Screen, shows up to three
configurations per page. To scroll through all of the entries, press
any key other than ‘Q.’
6.4 Linking LUNs to/from Fibre Channel Controllers
To make partitioned LUNs accessible to connected servers, the
administrator must link the LUNs to the RamSan’s Fibre Channel
controllers.
6.4.1 Via Web Interface
To change the links between LUNs and the Fibre Channel
controllers via the Web Management Interface:
• Click on the “Management Control Processor” graphic.
• Click on the “LUN Config” tab.
• Select the LUN to edit by clicking on the LUN graphic.
• Click the “Modify LUN” button.
• Select the links for the LUN by clicking the “Channel links”
checkboxes.
• Click the “OK” button.
RamSan-300/320/325 User’s Manual - 72 -