Tektronix AD007 - Manual (Page 19)

Getting Started
AD007 User Manual 5
External Features
Figure 2 shows the external features of the AD007 GPIB-LAN
Adapter
DC jack
RJ-45 port
Status indicators
GPIB connector
Figure 2: External features
Power On Self Test
NOTE. Do not connect the adapter to the network or GPIB at this
time.
1. Connect the power supply to the DC jack of the AD007 adapter.
2. Plug the power supply into a 100 to 240 VAC (
± 10%) power
source with the appropriate line cord.
3. During the 30-second power on routine which follows, the status
indicators blink amber to indicate a self test in progress.