Verifying network access to the adapter – Tektronix AD007 User Manual
Page 46
Getting Started
32
AD007 User Manual
Verifying Network Access to the Adapter
Once the AD007 adapter is configured on the network or configured
in a stand-alone setup, you should be able to browse to, or ping, the
IP address of the adapter.
Web Browser
Using a web browser, go to the currently configured IP address of the
adapter (i.e. http://IP_address). For the factory default address,
this entry would be
http://192.168.1.1
Network Ping
If you are unable to use the web browser, do these steps to ping the
IP address:
1.
Open a DOS window and type the currently-configured IP
address of the adapter (i.e. ping IP address). For the factory
default address, this entry is
ping 192.168.1.1
If the DNS is configured, you should also be able to ping the host
name:
ping hostname
2.
You should see a series of replies or an indication that the link is
valid. If the IP ping succeeded and the host name ping failed,
there is a problem with the DNS configuration. Contact your
network administrator.
3.
If you were able to ping the AD007 adapter, you should also be
able to access the web pages with a web browser. If not, contact
your network administrator.