Tektronix AD007 User Manual
Page 34
Getting Started
20
AD007 User Manual
a.
Assign the PC an IP address with the first three numbers
that are the same as the current AD007 IP address.
(For example, the IP address 192.168.1.2 is acceptable if
you are using the factory default 192.168.1.1 address of
the adapter).
b.
Assign the numbers for the subnet mask.
(For example, assign the subnet mask 255.255.255.0 if
you are using the factory default settings).
c.
If you are using the factory default settings to access the
adapter, the PC settings are now as follows:
IP address: 192.168.1.2
Subnet Mask: 255.255.255.0
13.
For Windows, while you have this box open, click on the DNS
configuration tab and click on Disable DNS.
14.
Click on the WINS tab and disable WINS.
15.
Reboot the PC for these changes to take affect.
NOTE. After you change the network settings on your PC, you will no
longer have access to your network files until you restore the network
settings on your PC. Remember to reboot your PC for any changed
settings to take affect.
16.
Using a web browser, enter the adapter’s currently configured IP
address. For example, if your adapter’s IP address is configured
to 192.168.1.1, you would enter the following:
http://192.168.1.1
17.
If you are prompted for a user name and password, you can
ignore the user name and enter the password. The factory default
password is ad007 (lowercase a, lowercase d, zero, zero, 7).
18.
On the network configuration web page of the adapter, enter the
correct IP address, subnet mask, and router (gateway) address.