Loading a multimediacard – Technicolor - Thomson VMD 6 User Manual
Page 12
E N
1 1
MultiMediaCard
Clipped edge
Card Cover
Loading A MultiMediaCard
1
Make sure the camcorder’s power is off.
2
Push the latch upward to open the card cover
(MEMORY CARD).
3
Insert the MultiMediaCard clipped edge first, with the
label facing up.
•Do not touch the terminal on the reverse side of the
label.
4
To close the card cover, push it until you hear a click.
NOTES:
●
Be sure to use only MultiMediaCards marked
“
”.
●
Some brands of MultiMediaCards are not compatible
with this camcorder. Before purchasing a
MultiMediaCard, consult its manufacturer or dealer.
To Unload A MultiMediaCard . . .
.... in step 3 push the MultiMediaCard, which then comes
out of the camcorder automatically. Pull it out and
close the card cover.
ATTENTION:
Do not insert/remove the MultiMediaCard while the
camcorder is turned on, as this may cause the
MultiMediaCard to be corrupted or cause the
camcorder to become unable to recognize whether or
not the card is installed.
VMD6 EN(02/39)
28/08/00, 15:46
11