Technicolor - Thomson VMD 6 - Manual (Page 39)

38
EN
C
E
A
X
N
E
C
C
D
E
U
S
L
T
C
E
MENU
PL
AY OFF
0 0 1 FX 0 0 2 SX 0 0 3 S
0 0 5 F 0 0 4 F
E X I T
0 0 6 F
< D E L E T E >
Deleting Images
Previously shot images can be deleted either one at a time
or all at once.
1 Set the VIDEO/DSC Switch to “ ”, then set the
Power Switch to “ ” while pressing down the
Lock Button.
•A stored image is displayed.
2 Press MENU/BRIGHT. The Menu Screen appears.
Rotate it to select “
” and press it. “DSC MENU”
appears.
3 Rotate MENU/BRIGHT to select “DELETE” and press
it. The Sub Menu appears.
TO SELECT AN IMAGE BY BROWSING
IMAGES STORED IN MEMORY
Before doing the following, perform steps 1 through 3 above.
4 Rotate MENU/BRIGHT to select “SELECT” and press
it. The DELETE Index Screen appears.
5 Rotate MENU/BRIGHT to move the green frame to the
desired image that you wish to delete and press it. An
“
” appears above the selected image.
Repeat this procedure for all images that you wish to
delete.
To deselect an image, press MENU/BRIGHT again.
The “
” disappears.
6 Rotate MENU/BRIGHT upward to select “NEXT” and
press it. The Deletion Confirmation Screen appears.
7 Rotate MENU/BRIGHT to select “EXECUTE” and
press it. The selected images are deleted and the
normal playback screen appears.
•To cancel deletion, rotate MENU/BRIGHT to select
“CANCEL” and press it.
TO DELETE ALL IMAGES
Before doing the following, perform steps 1 through 3 above.
4 Rotate MENU/BRIGHT to select “ALL” and press it.
The Deletion Confirmation Screen appears.
5 Rotate MENU/BRIGHT to select “EXECUTE” and
press it. All the images are deleted and the normal
playback screen appears.
•To cancel deletion, rotate MENU/BRIGHT to select
“CANCEL” and press it.
NOTES:
● Protected images (
੬
pg. 37) cannot be deleted with the
above operation. To delete them, remove protection first.
● Once images are deleted, they cannot be restored.
Check images before deleting.
Power Switch
MENU/BRIGHT Wheel
Lock Button
Display
DELETE Index
Screen
Deletion
Confirmation
Screen
PLAYBACK Advanced Features For D.S.C. (cont.)
VIDEO/DSC Switch
(Open the LCD monitor
to access this switch.)
CAUTION:
Do not remove the MultiMediaCard or
perform any other operation (such as
turning off the camcorder) during deletion.
Also, be sure to use the provided AC Power
Adapter/Charger, as the MultiMediaCard
may be corrupted if the battery becomes
exhausted during deletion. If the
MultiMediaCard becomes corrupted,
initialise it. (
੬
pg. 39)
VMD6 EN(02/39) 28/08/00, 15:50 38