Warning indications – Technicolor - Thomson VMD 6 User Manual

Page 72

Advertising
background image

EN

71

Indications

Function

Displays the battery remaining power.

Remaining power level: high

Remaining power level: exhausted

As the battery power comes close to nil, the battery indicator

blinks.

When the battery power is exhausted, power turns off automatically.

Appears when no tape is loaded.

(

pg. 10)

Appears when the erase protection tab is set to “SAVE” while the Power
Switch is set to “

” or “

” and the VIDEO/DSC Switch is set to

“VIDEO”.

(

pg. 10)

Appears if dirt is detected on the heads. Use an optional cleaning cassette.

(

pg. 75)

Appears if condensation occurs. When this indication is displayed, wait
more than 1 hour until condensation disappears.

Appears if a tape is not loaded when the Recording Start/Stop Button or
SNAPSHOT Button is pressed while the Power Switch is set to “

” or

” and the VIDEO/DSC Switch is set to “VIDEO”.

Appears when the tape ends during recording or playback.

(

pg. 15)

Appears if a tape in another format is loaded.

Appears when the date/time is not set.

(

pg. 9)

Appears when the built-in clock battery runs out and the

previously set date/time is erased. Consult your nearest THOMSON
dealer
for replacement.

Appears for 5 seconds after power is turned on if the lens cap is attached.

Appears if Audio Dubbing is attempted on a blank portion of a tape.

(

pg. 58)

Appears if Audio Dubbing is attempted on a tape recorded in the LP

mode.

(

pg. 58)

Appears if Audio Dubbing is attempted on a tape recorded in 16-bit

audio.

(

pg. 58)

Appears if A. DUB (e) on the remote control is pressed when the erase

protection tab is set to “SAVE”.

(

pg. 58)

Appears when the MultiMediaCard’s memory is full and shooting is not
possible.

Warning Indications

TAPE!

TAPE END

DIFFERENT

FORMATTED TAPE

CHECK TAPE’S ERASE

PROTECTION SWITCH

HEAD CLEANING

REQUIRED USE CLEAN-

ING CASSETTE

CONDENSATION,

OPERATION PAUSED

PLEASE WAIT

CONTINUED ON NEXT PAGE

SET DATE/TIME!

MEMORY IS FULL

A. DUB ERROR!

<CANNOT DUB

ON AN LP RECORDED

TAPE>

<CANNOT DUB

ON A 16BIT

RECORDING>

<CHECK TAPE’S ERASE

PROTECTION SWITCH>

A. DUB ERROR!

LENS CAP

VMD6 EN(40/80)

28/08/00, 16:08

71

Advertising