Technicolor - Thomson VMD 6 - Manual (Page 73)

72
EN
INDEX Indications (cont.)
Indications Function
● Appears if dubbing of copyguarded signals is attempted while this
camcorder is being used as a recorder. (
੬
pg. 45)
● Appears in the following cases when dubbing from a tape to a
MultiMediaCard:
– when no MultiMediaCard is loaded.
– when the MultiMediaCard's memory is full.
– when the MultiMediaCard is not formatted.
(
੬
pg. 47)
● Appears in the following cases when dubbing still images stored in the
MultiMediaCard’s memory to a tape:
– when condensation occurs.
– when no tape is loaded.
– when the erase protection tab is set to “SAVE”.
– when a tape in another format is loaded.
– when the tape ends.
(
੬
pg. 46)
Appears if a MultiMediaCard is not loaded when SNAPSHOT is pressed
while the Power Switch is set to “
” or “ ” and the VIDEO/DSC Switch
is set to “ ”.
Appears when there is a problem with a MultiMediaCard and its memory is
corrupt, or it has not been initialised. Initialise the MultiMediaCard.
(
੬
pg. 39)
Appears if there are no images stored in the MultiMediaCard when the
Power Switch is set to “
” and the VIDEO/DSC Switch is set to “ ”.
The error indications (E01 — E06) show what type of malfunction has
occured. When an error indication appears, the camcorder turns off
automatically. Remove the power supply (battery, etc.) and wait a few
minutes for the indication to clear. When it does, you can resume using the
camcorder. If the indication remains, consult your nearest THOMSON
dealer.
NO STORED IMAGE
E01 — E06
UNIT IN SAFEGUARD
MODE REMOVE AND
REATTACH BATTERY
PLEASE
FORMAT
MEMORY CARD!
COPYING FAILED
VMD6 EN(40/80) 28/08/00, 16:08 72