Technicolor - Thomson VMD 6 - Manual (Page 45)

44
EN
DUBBING
Dubbing To A VCR
1 Following the illustration, connect the camcorder and
the VCR. Also refer to pg. 40 and 41.
2 Set the VIDEO/DSC Switch to “VIDEO”, then set the
camcorder’s Power Switch to “
” while pressing
down the Lock Button located on the switch, turn on
the VCR’s power, and insert the appropriate cassettes
in the camcorder and the VCR.
3 Engage the VCR’s AUX and Record-Pause modes.
4 Engage the camcorder’s Play mode to find a spot just
before the edit-in point. Once it is reached, press
4
/6 on the camcorder.
5 Press 4/6 on the camcorder and engage the VCR’s
Record mode.
6 Engage the VCR’s Record-Pause mode and press
4
/6 on the camcorder.
7 Repeat steps 4 through 6 for additional editing, then
stop the VCR and camcorder when finished.
NOTES:
● Before you start dubbing, make sure that the indications
do not appear on the connected TV. If they do, they are
being recorded onto the new tape.
To choose whether or not the following displays appear
on the connected TV . . .
•Date/Time
.... set “DATE/TIME” to “ON” or “OFF” in the Menu
Screen (
੬
pg. 32).
•Time Code
.... set “TIME CODE” to “ON” or “OFF” in the Menu
Screen (
੬
pg. 32).
•Playback Sound Mode, Tape Speed And Tape Running
Displays
.... set “ON SCREEN” to “LCD” or “SIMPLE” in the
Menu Screen (
੬
pg. 32). Or, press DISPLAY on the
remote control.
● When connecting the cables, make sure to connect the
ends with a core filter to the camcorder. The core filter
reduces interference.
● Set the video out select switch of the cable adapter as
required:
Y/C
: When connecting to a TV or VCR which accepts
Y/C signals and uses an S-Video cable.
CVBS : When connecting to a TV or VCR which does
not accept Y/C signals and uses an audio/video
cable.
● It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery pack
(
੬
pg. 7).
● You can use Playback Zoom (
੬
pg. 50) or Playback
Special Effects (
੬
pg. 51) in step 5.
Connector
cover**
TV
To AV
To S
* Connect when an S-Video cable is not used.
** When connecting the cables, open this cover.
Core filter
Power Switch
VCR (Recording deck)
To AUDIO,
VIDEO* and
-IN
connectors
S-Video cable
(optional)
Core filter
“Y/C”/“CVBS”
video out
select switch
If your VCR has a
SCART connector,
use the provided
cable adapter.
Audio/Video cable
[mini-plug to RCA
plug] (provided)
VMD6 EN(40/80) 28/08/00, 16:07 44