Toshiba CARRIER RAV-SP300AT2-UL - Manual (Page 87)

– 87 –
No.
ˆ
‰
Part name
Reactor
Procedure
1) Perform works of Detachment 1 of

,
‚
,
ƒ
and
„
.
2) Take off the fixing screw for the reactor.
(M4, 8 mm)
Remarks
Š
Reactors Reactors Partition Partition
plate plate
Reactor Reactor
support board support board
PMV coil PMV coil PMV coil
Reactors Partition
plate
Reactor
support board
1. Detachment
1) Perform works of Detachment

and
‚
.
2) Release the coil from the concavity by
turning it, and remove coil from the PMV.
2. Attachment
1) Put the coil deep into the bottom position.
2) Fix the coil firmly by turning it to the
concavity.
1. Detachment
1) Perform works of Detachment 1 of

and
‚
.
2) Remove the front cabinet, and put it
down so that fan guard side directs
downward.
CAUTION
Perform works on a corrugated cardboard,
cloth, etc. to prevent flaw on the product.
3) Remove the fan guard stopper.
(4 positions)
2. Attachment
1) Insert the fan guard stopper and then fix
the fan guard. (4 positions)
CAUTION
All the attaching works have completed.
Check that all the hooking claws and the
fan guard stopper are fixed to the specified
positions.
Pulse Motor
Valve (PMV) coil
Fan guard
Front cabinet Front cabinet
Fan guard stopper Fan guard stopper
Front cabinet Front cabinet
Fan guard Fan guard
Front cabinet
Fan guard
Fan guard stopper
Front cabinet