Tekxon Technology K3 - Manual (Page 27)

25
2 Select the “Photo Effect” item in the menu and press OK to confirm.
3 Press “up” or “down” to select the photo effect option and press OK to confirm.
• “Normal”: No special photo effect.
• “Black and white”: Images are recorded in black and white.
• “Sepia”: Images are recorded in a nostalgic brown tone.
Sepia: Brown/amber simulates the brown tone of old photos caused by oxidation of
the chemical components of the photograph. Sepia shifts the brown tones of the
digital image to the dark brown range to give the impression of an old photo.
5.10 Setting the driver
The default driver setting is MASS.
If the camera is in PC-MASS Mode
1
Press the menu button to activate the driver select menu.
2
Press or to select the required driver type and press OK to confirm.
If the camera isn’t in PC-MASS Mode
1
Press the button to activate the configuration menu.
2
Select the “Drive Type” item in the menu and press OK to confirm.