Tekxon Technology K3 - Manual (Page 9)

7
3.3 Inserting and removing the SD/MMC card
You can use SD or MMC cards to increase the memory capacity. Switch off the camera
before inserting the card. Insert the card as follows (photographs, sound and video recordings
are no longer
stored in the internal memory, but stored on the card).
Inserting the card
1
Open the cover of the card slot.
2
Insert the card in the card slot until it
locks into place.
3
Close the cover of the card slot.
Removing the card
Open the cover of the card slot. Press the card downwards briefly to unlock it. Remove or
change the card and close the card slot cover again.