Tekxon Technology K3 - Manual (Page 31)

29
6 Installing the software
6.1 Supported operating systems
• Windows 98 (including Second Edition)
• Windows Me
• Windows 2000
• Windows XP
Microsoft Windows 98, Windows 98 SW, Windows 2000 Professional, Windows ME or
Windows XP systems are pre-installed.
6.2 Installing the driver
Driver installation is similar for the various Windows systems. When specifying the path, you
must simply select the driver in the CD-ROM drive.
The camera has two USB driver modes: TWAIN and MASS. MASS is the default setting. The
procedure for installing the drivers for each of the two modes is described below.
6.2.1 Installing the driver in MASS mode
When the camera is in MASS mode, Windows ME, 2000 and
XP automatically recognise the camera and no driver must be installed.
The description of the driver installation procedure refers to Windows 98.
1.
When the camera is connected to the
computer in MASS mode, the Found New
Hardware Wizard appears on your PC
monitor.
Click “Next” to open the next window