Tekxon Technology K3 User Manual
Page 33
31
6.2.2
Installing the driver in TWAIN mode
1.
Connect the camera to the computer. The system should automatically recognise that a
new device has been connected.
2.
In TWAIN mode, the driver must be installed for all systems. The procedure is similar to
that described for Mass mode.
3.
Under Windows 2000, you may be asked
about the digital signature of the driver.
Click “Yes” to install the driver.
4.
When installing the driver on Windows
XP the Found New Hardware Wizard
appears. Select “Install the software
automatically” (recommended).
The following window may appear. Click
“Continue” and wait until the installation
is complete.
5.
The installation procedure under Windows ME is similar.
Either of two driver modes can be selected for the camera.
TWAIN mode uses the video components for the PC (WebCam).
In MASS mode, the internal memory is used as mobile memory. It can be treated
like a hard drive. You can copy, delete, cut and download photos and videos from