Telit Wireless Solutions GM882 - Manual (Page 29)

29
Internet Configuration (menu 8-4)
Before you make the first WAP connection, you must set some parameters in
the phone – most of them, if they are missing, are given by the service provider.
The phone could already be set up for the Internet access; in this case the data
needed for the Internet access are already set in the menus: press several
times the key

to exit the menu and go back to the display in stand-by.
The phone can support up to a maximum of three “Profiles” according to the
manufacture settings.
The WAP configuration menu has the following structure:
1 WAP Browser >WAP Connection
2 Last Page >go to the previous WAP page
3 Favourite \>Insert a favourite
4 Settings Profile 1
Profile 2
Profile 3
1 Connection Name > Insert name
2 IP Address > ____.____.____.____
3 IP Port > Nr. IP Port
5Homepage > Homepage address
6Linger time > Insert
7Connections > Select
8Save and exit > Profile Name
Keying in data for the configuration...
Select the parameter you want to set by moving the joystick up or down and
press it to confirm the entry that you need.
Key in the data and confirm with

.
Go to the next data by moving the joystick up or down.
Move the joystick to the left to go back to the upper menu level (without
confirming the changes made). Move the joystick up or down to scroll through
the options, and press key

to clear some data.
Once you have keyed in all the data, select 7 – Save and exit and confirm by
pressing

to enable the current profile and make it effective.