Telit Wireless Solutions GM882 - Manual (Page 9)

9
BASIC FUNCTIONS OF THE PHONE
Making a call
When the phone is in stand-by mode, key in the number of the receiver
including the area code, and press the key

.
Use the key

to delete the last figure or – keeping it pressed for a second – to
delete the whole number and go back to the stand-by mode.
To key in an international prefix, press the key for a while and digit +
(eg. +39 02 xxxxxxx to call Milan from abroad).
If the phone of the receiver is engaged, your phone can automatically recall the
same number at longer intervals of time the more attempts it makes.
To stop the sequence of automatic recalling at any time, press the key

.
Receiving a call
When someone is calling you, the display and the keypad light up; on the
display you see the text “Call” and the caller’s number (if available); if you have
previously inserted this number in your phone book, the caller’s name will
automatically be displayed.
If the vibra-call function is ON, the Gm882 informs you, vibrating, that there is
an incoming call (see page 38).
When someone calls you, 2 icons are viewed on the lower line of the display
that show the functions of the keys (soft key) situated below.
Press:

to answer a call

to reject a call (the caller hears the ringing tone while your phone rings
and the engaged tone when you reject the call).
If you press this key you can also divert the call to your voice mailbox.
To end the conversation press the key

.
During a conversation . . .
You can set the volume of the loudspeaker or of the headset by moving the
joystick left and right
You can disable and re-enable the microphone by pressing the key

for a
second
You can digit a number on the keypad and call it without interrupting the first
conversation.