Telit Wireless Solutions GM882 - Manual (Page 38)

38
Audio profiles (menu 4-5)
The Gm882 has 6 audio profiles which you can use to set the various
parameters on ringing tones, vibrating alert and alert tones. At any time, you
can enable the audio profile most suitable for the situation you are in, enabling
and setting all the different parameters in a single touch.
These parameters are already defined when you buy the phone; you can use
or change them as you like.
For example, you can set the profile Outdoor so that the tones ring at the
highest volume accompanied by the vibrating alert and that each time a key is
pressed there is a “beep” whose volume can be regulated. If you then go to a
Meeting, you simply enable this set previously profile to switch off the ringing
tones, and incoming calls are signalled by a short vibration and the keypad no
longer beeps when touched.
N.B. the menu Audio profiles is in the quick menu.
By pressing the joystick when one of the audio profiles is selected, you have
access to the menu which allows you to set the various parameters:
Ringer (profile X – menu 1)
From this menu entry you can set the following parameters:
Ring volume: this is the volume of the ringing tone when there is an
incoming call. Move the joystick left and right to set the volume, then press

to confirm.
Ring type: this is the melody that will be played. Select it with the joystick
and press

to confirm.
Ringer mode: you can choose between different alerting modes:
1 Only ringer
2 Ringing after vibro
3 Ringer and vibro: this enables both each time there is a call
4 Vibro: the phone won’t play any sound, but its vibrations will let you
know that someone is calling you.
5 Ringer off: both vibro and sound are de-activated.
Manner mode: when this option is enabled, the volume of the ringing tones
is very low to begin with and gradually gets louder.
Alarm (profile X - menu 2)
You can set the audio features of the alarm clock in the same way and with a
similar menu as for the ringing tones with a choice of melody, volume, vibrating
alert etc.
Keyclick vol. (profile X - menu 3): the Gm882 can beep every time you press
a key; you can set the volume of this beep for each audio profile. Move the
joystick left or right to set the volume desired and press

to confirm and go
back to the menu.