Telit Wireless Solutions GM882 - Manual (Page 7)

7
SYMBOLS SHOWN ON THE DISPLAY
the signal strength of the cellular network (maximum 5 bars); if the name
of the GSM network is not displayed, but the bars are shown, you can
only make emergency calls
shows that a memo for an appointment, or the alarm clock have been
enabled
a headset or a viva voce device (optional) are connected
shows that there are EMS messages that have not been read; if it flashes,
it means that there is no more space in the SIM card for new SMS
messages. Erase some of the existing EMS messages to receive new
ones
shows the battery charge level: from 3 fixed bars (full) to flashing bars
(flat). During recharge the bars in the battery symbol progressively light
up; when the battery has been totally recharged, the light is fixed.
12.22 18/04 shows the time and date. To set them, see page 25
the vibrating alert function is ON, the ringing tones are OFF
the ringing tones are OFF
indicates that call divert is ON
the keypad is locked. To unlock it press

for a while, then

indicates that automatic answering is ON (see page 39)
!
the roaming mode is ON (the phone is connected to a different GSM
network from the operator that issued the SIM card and calls are made
on this network with possible changes to the price)
0
shows that you are registered on a GSM network without roaming which
means that you can only make emergency calls
%
if this is ON, it shows the home zone status (the network operator or the
service provider can give you more detailed information on this) or your
own network after you have searched for a new network from the menu.
there is a message in your mailbox (this function depends on the SIM
card)