Telit Wireless Solutions GM882 - Manual (Page 37)

37
Wallpaper (4-1-5): use this function to Select (4-1-5-1) the image you
want to have on the display in stand-by mode instead of the logo of the
network operator (whose name will however appear at the top). With
Enable (4-1-5-2) you choose which to have on your display between the
image or the operator’s logo.
The menu Fonts (menu 4-2) allows you to choose between 3 different types of
character (font) for the text on the display: Young, Thin and Classic.
Move the joystick up and down to select the one you like and press it to confirm.
Security (menu 4-3) is the menu where you find the functions on the security
codes and the automatic keypad lock.
PIN: this enables the PIN request when you switch on the phone (menu 4-
3-1-1), you can change the current PIN code (menu 4-3-1-2) and the PIN2
code (menu 4-3-1-3).
Phone lock (menu 4-3-2): in order to use the phone you need to know a 5
figure code to insert once you have switched the phone on (when you buy
the phone the code is 00000) which you can modify with the function
Change code (menu 4-3-2-3). With No lock (menu 4-3-2-1) the code is
not requested. To enable the request, select Lock (menu 4-3-2-2).
Autolock keyboard: by enabling this function, the keypad is automatically
locked after it has not been touched for 30 seconds. You can set up the
keypad lock in the same way as the manual lock (see “Keypad locked/
unlocked” on page 10)
Networks (menu 4-4)
From this menu you can connect your phone to the GSM network.
With Search Network the telephone searches for networks that are
available in your area and gives you the list of the networks that have been
found. Select the network you want with the joystick and press it to confirm.
The networks indicated with a crossed out telephone receiver cannot be
used.
Home net shows the name of the operator that issued the SIM card
inserted in the phone.
Network list allows you to create a list of GSM networks which the phone
will try to connect to, should your own be unavailable. Select the entry
<Empty> and press the joystick; the list of known networks will be viewed.
To select one and go back to the priority list, press the joystick on the name
of the network you want.
Selection: this function enables the Automatic or Manual search mode
of the GSM network.