Telit Wireless Solutions GM882 - Manual (Page 4)

4
BATTERY RECHARGE
Rechargeable Ni-MH batteries (Nickel Metalhydrate, or Nickel-Metalhydride)
power this phone.
Note: only use original batteries and battery-chargers.
Ni-MH batteries are subject to the “memo-effect”, that is the progressive loss of
power efficiency if they are not recharged correctly. In order to obtain the best
results, remember to recharge the battery only after it is completely flat.
IMPORTANT
Connect the battery-charger only when the battery is installed.
Even though the connectors are different, pay attention not to confuse
the connector for the battery-charger on the right-hand side of the phone
with the one for the hand-free on the upper part.
Recharging the battery
• Switch off the phone by keeping the key

pressed for a while.
• Insert the lead of the battery-charger into the connector on the right-hand side
of the phone, then connect the battery-charger to the socket (first check the
tension indicated on the label of the battery-charger).
Note: In order to greatly improve the performance and the life of the
battery, it should be discharged and recharged twice before you use the
phone for the first time.
Note: when recharging the battery, the room temperature, which is not the
one shown on the display, must be between 0° and +45°C.