TechniSat ST 6002 S - Manual (Page 12)

6.1.2 Basic Programming / Initial Set Up
Initially to program the receiver you have to carry out a Master
Reset. Therefore, move the cursor
to the option "Master
Reset" on the System Menu and press ENTER.
After the first press a red warning screen appears. This will
disappear when you press ENTER twice more and your recei-
ver is then set.
ATTENTION: The preprogramming of the receiver is not affec-
ted by the cancellation procedure. This data is in the memory
and cannot be deleted.
After the third press the message "All memory cleared" will
appear and you will immediately return to the System Menu.
This time the arrow is pointing to "Set Dish Limit".
TechniSat ST 6002 S
13
E N T E R
E N T E R
E N T E R