TechniSat ST 6002 S - Manual (Page 28)

TechniSat ST 6002 S
7.3.4. Setting the Clock
Move the cursor to “Internal clock adjustment” and then press
ENTER. Use the position keys to move the cursor to the appro-
priate line and keep pressing the
keys until the required
data appears. Then press ENTER to start the clock. To return
to the main menu press CNCL.
The clock continues to function once the receiver has been
switched off at the mains. A special battery is built in to the
receiver with a guaranteed long life.
29
E N T E R
E N T E R