TechniSat ST 6002 S - Manual (Page 33)

TechniSat ST 6002 S
8.4 Programming The Channels of new Satellites
1. First program the new satellites as described in the section
on "Programming of Future Satellites".
2. Select an already stored channel whose parameters are
similar to the ones of the new channel. Move the cursor to
"copy channel data" and press ENTER. Move the cursor to
"sat" and select the new satellite e.g. "Spare 1".
3. Now move the cursor to "Channel" and choose the one you
wish to use for the new satellite. Then press ENTER.
NOTE: The former data of the channel you copy to will be era-
sed. Then alter the parameters accordingly in order to recei-
ve the new channel (Video/Audio/Skew).
34
E N T E R
E N T E R
E N T E R
C N C L