TechniSat ST 6002 S - Manual (Page 37)

TechniSat ST 6002 S
8.6.2 Audio Menu
To call up this menu press the AUDIO button. The following
parameters can be changed:
"B/W" - The audio bandwidth can be switched
between 150, 280 or 350 MHz.
"De-Emph" - You can choose between 50us, J17 and
Wegener.
"Pair" - If you switch it on, you can choose only
the most common audio subcarrier freq.
pairs (e.g. 7.02/7.20) as Audio A & B
frequencies. This simplifies the pro-
gramming of stereo programmes.
"Mode" - Select either mono or stereo.
"Audio A" - You can enter the Audio A fequency
either by using the buttons or by
keying it in directly.
"Audio B" - This parameter only appears if "Stereo"
is selected.
To store audio parameters which have been changed, leave
this menu using ENTER.
38