Important safety precautions – Tascam DP-02 User Manual
Page 18
IMPORTANT SAFETY PRECAUTIONS
1
TASCAM DP-02/DP-02CF
1 – Starting out with your DP-02/DP-02CF
IN and OUT point repeatedly (see “Repeat” on page 34).
With the
SHIFT
key pressed, the
INTERVAL
key is used
to bring up the
REPEAT
INTERVAL
screen to adjust
the repeat interval time from 0.5 to 9.9 seconds (see
“Setting the repeat interval” on page 35).
l
µ /
INSERT key
Pressing the
µ
key skips to the previous location
mark in the song being played back.
With the
SHIFT
key pressed, the
INSERT
key is used to
mark a location point (see “Location marks” on page 29).
Pressing the
µ
and
≤
keys togather displays the
LOCATION MARK
list screen.
On the DP-02, while playing back a CD, pressing the
µ
key skips the playback position of the track being
played back to the beginning.
;
≤
/ DELETE key
Pressing the
≤
key skips to the next location mark.
With the
SHIFT
key pressed, the
DELETE
key is used
to delete the location mark (see “Location marks” on
page 29).
Pressing the
µ
and
≤
key togather displays the
LOCATION MARK
list screen.
On the DP-02, while playing back a CD, pressing the
≤
key skips the playback position to the beginning of
the next track.
z
IN / SET IN, OUT / SET OUT, TO / SET TO key
Pressing the
IN
,
OUT
, or
TO
keys alone moves to IN,
OUT, or TO point.
With the
SHIFT
key pressed, the
SET IN
,
SET OUT
,
or
SET TO
keys are used to mark the current playback
position as IN, OUT, or TO points (see “ IN and OUT
marks” on page 30).
x
CD / FINALIZE key on the DP-02
Press the
CD
key to bring up the
CD
screen.
With the
SHIFT
key pressed, the
FINALIZE
key is used
to bring up the
FINALIZE
screen.
CARD key on the DP-02CF
Pressing the
CARD
key brings up the
CARD
screen.
c
ø
EJECT / ERASE key on the DP-02
This key ejects the CD loaded into the unit.
With the
SHIFT
key pressed, the
ERASE
key is used to
bring up the
CD-RW
ERASE
screen (see “Erasing CD-
RW” on page 69).
USB key on the DP-02CF
Press this key to bring up the
USB
screen (see “Open
and Close” on page 43).
v
HOME / SYSTEM INFO key
Press the
HOME
key to display the home screen (on
some screens, this key does nothing).
With the
SHIFT
key pressed, the
SYSTEM INFO
key is
used to display the
SYSTEM
INFORMATION
screen.
b
MENU / TITLE key
Press the
MENU
key to bring up the
MENU
screen.
With the
SHIFT
key pressed, the
TITLE
key is used to
bring up the
TITLE
screen (see “Titling” on page 11).
n
SONG / SONG INFO key
Press the
SONG
key to bring up the
SONG
screen.
With the
SHIFT
key pressed, the
SONG INFO
key is
used to bring up the
SONG
INFORMATION
screen to
show the information of the song currently loaded.
m
TRACK EDIT / POINT EDIT key
Press the
TRACK EDIT
key to bring up the
TRACK
EDIT
screen.
With the
SHIFT
key pressed, the
POINT EDIT
key is
used to bring up the
POINT
EDIT
screen.
,
DATA dial
Use this dial for selection of menu or action, or adjust-
ment of values.
.
CURSOR (˙,¥,¶,§) keys
Use these keys to select a menu or action, or to enter
the selection.
The
˙
key can be used to return to the previous screen.
/
YES/ENTER key
Use this key to enter the selection or confirm the
action.
!
NO/EXIT key
Use this key to exit from the current menu screen and
go back to the previous screen, or to cancel the selec-
tion or action.
@
SHIFT key
This key is always used with another key, which takes
on the function shown in the label below that key
(black-on-orange).
#
HISTORY / CLEAR key
Pressing the
HISTORY
key brings up the
HISTORY
list screen. This screen is used to undo or redo many
actions at once (see “Undoing/Redoing actions at once”
on page 26).
With the
SHIFT
key, the
CLEAR
key is used to clear
the unused audio parts and histories (actions). (See
“Deleting unused data” on page 26.)
$
UNDO/REDO key
This key is used to undo or redo the action (see
“Undoing/Redoing an operation” on page 25).
%
FUNCTION / SET.F key
The
FUNCTION
key can be used as a short cut key
when assigned to an action. After assigning, pressing
the key calls that action directory.
To assign the
FUNCTION
key, with the
SHIFT
key
pressed, press the
SET.F
key to bring up the
SET
FUNCTION
list screen. Select an action in the list
and press
YES/ENTER
to assign the action to the
FUNCTION
key.