Tascam DP-02 - Manual (Page 36)

IMPORTANT SAFETY PRECAUTIONS

TASCAM DP-02/DP-02CF
2 – Advanced techniques
When both LOCATE LIST ( µ / ≤ ) keys are held down
together in “bars and beats” mode, the display looks some-
thing like this:
Use the cursor ( ¶ , § ) keys to select the mark to trim,
and press the ¥ cursor key to show the trim screen.
Selecting a point to edit shows the bars and beats below
the absolute time value. The bars and beats cannot be set
directly, but change, together with the absolute time value,
as the
DATA dial is turned:
NOTE
IN, OUT and TO points do not show the bars/beats
value when being edited.
Metronome
To help you keep in time, the unit provides an internal
metronome function and a MIDI metronome function. The
internal metronome function allows you to listen to the
metronome on the unit, while the MIDI metronome func-
tion generates a metronome output on the MIDI interface.
1 Press MENU , use the DATA dial or cursor ( ¶ , §
) keys to select the MIDI menu, and press the ¥
cursor or YES/ENTER key.
2 Select the
METRONOME
item, and press the ¥ cursor
or YES/ENTER key.
When “INTERNAL” is selected at “Output”
[internal metronome]
The unit’s internal metronome (not an external sound source)
can be output to headphones and
LINE OUTPUT L/R .
Mode Select from
REC ONLY (only at recording) and
REC&PLAY (at recording and playback).
T I P
The internal metronome is not output in the following
instances:
• While the BOUNCE key is lit
• While the MASTER key is flashing
or is lit
LEVEL Set the output level of the metronome within the
range 0 to 127. (The output level cannot be adjusted on the
MASTER fader.)
ª
When “MIDI” is selected at “Output” [MIDI
metronome]
This setting generates a metronome output via the MIDI
interface. Generally, percussion type sounds are used as
the metronome. Any sound, of course, can be produced.
You can select MIDI channel, note/note on velocity of a
regular click, and note/note on velocity of an accent.
Scroll the list to set the following parameters:
Mode Select from
REC ONLY
(only at recording) and
REC&PLAY
(at recording and playback).
MIDI Ch The MIDI channel on which the metronome
signals are output.
T I P
Channel 10 is defined as the default drum channel for
all General MIDI devices.
AccNote The note played at the start of each bar. C3 is
equivalent to MIDI note 60.
AccVelo The velocity (which typically affects the
volume) of the note at the start of each bar.
NrmNote The note played at each beat, except at the
start of each bar. C3 is equivalent to MIDI note 60.
NrmVelo The velocity (which typically affects the volume)
of the note at each beat, except the start of each bar.
When “ OFF” is selected at “ Output”
The metronome function is disabled, and no items other
than Output are displayed.
ª