Tascam DP-02 - Manual (Page 52)

IMPORTANT SAFETY PRECAUTIONS

TASCAM DP-02/DP-02CF
2 – Advanced techniques
This deletes all the material in a track or tracks. There are
no
IN and OUT points when performing the clean out func-
tion.
There is only one value that you can change:
CLEAN OUT.TRK Select an individual track (1 through
8), a pair of tracks (1/2, 3/4, 5/6, 7/8), or all the tracks (1-8).
Press YES/ENTER to perform the operation or NO/EXIT to
leave this screen.
CLEAN OUT
Disconnect the drum machine from the STEREO MIX
and connect it to the RETURN jacks. Make sure that the
drum machine is set up to be synchronized to the unit (
“Working with MIDI” on page 37).
Mix down again with only the two cloned tracks, using
the
EFFECT RETURN control to add and adjust the
levels of the drum machine. You now have a mix includ-
ing the drum machine as well as the effect added to the
main tracks.
•
•