Tascam DP-02 - Manual (Page 43)

IMPORTANT SAFETY INSTRUCTIONS
TASCAM DP-02/DP-02CF

2 – Advanced techniques
3. You can now unplug the USB cable.
If a panel telling you it is not safe to remove the unit
appears, do not “close” or unplug the unit. Close all
programs and windows that are accessing the files on the
unit and try again.
Disconnecting from a Macintosh system
When you are disconnecting the unit from a Macintosh
system (OS X), drag the disk icon to the Trash, or press
Command-E (OS X 10.3 also has a button in the Finder
which allows ejecting removable media). When the icon
has disappeared from your desktop, you can disconnect the
unit.
ª
Before using the unit’s FAT partition, you must “open” the
system so that it can be read by the PC. While the system is
open, you cannot perform any recording, playback, etc., or
any operations involving the unit’s recording media.
T I P
Make sure that you have saved songs, copied all the
files you’re going to Transfer to the PC to the FAT
partition, etc., before you open the unit.
1. Connect the unit to the PC.
2. On the DP-02, press MENU and select USB .
On the DP-02CF, press the USB key on the top
panel.
A popup message appears, asking if you are sure.
3. Press YES/ENTER again. The screen shows:
The unit is now locked until you press YES/ENTER .
CAUTION
Remove the unit from the computer (see “Using the
USB connection” on page 42) before pressing YES/
ENTER.
"Open" and "Close"