Windows 98 setup for data & pc fax – Telular Phonecell SX5T CDMA2000 User Manual
Page 28
Phonecell
®
SX5T CDMA2000
24
User Manual
Windows 98 Setup for Data & PC Fax
Contact your service provider to determine data/PC fax service availability, then follow these steps.
1.
Connect and Select Data Ports.
Serial Connection – default setting
(Allows PC Fax, 1X Data and Circuit Switched Data)
·
Use a Telular serial cable (part #1L01A042 or 81025801) to connect the computer’s
serial port to the SX5T’s data port.
·
Enter Configuration Mode.
Press
<lock code>
.
·
Set the SX5T Data Port to Serial.
Press .
Modem/Phone Connection
(Allows PC Fax and Circuit Switched Data)
·
Use a standard telephone cord to connect the computer’s modem out port to either
of the SX5T’s phone (RJ11) jacks.
·
Enter Configuration Mode.
Press
<lock code>
.
·
Set the SX5T Data Port to RJ11.
Press .
2.
Set Baud Speed.
·
Enter Configuration Mode.
Press
<lock code>
.
·
For fax, set speed to 19200. Press
.
·
For data, set speed to 115200. Press
.
3.
Install the SX5T as a new modem by opening the
Start > Settings > Control Panel
then clicking
on the
Modems
phone icon.
#
5
*
6
3
1
*
#
#
2
*
6
3
1
*
#
#
*
0
*
#
Note:
The SX5T supports data transfer over serial and modem/phone (RJ11) connections for Windows 98
PCs. Data over USB is not supported for Windows 98.
#
0
*
1
*
3
1
1
*
#
#
*
0
*
#
#
0
*
5
3
1
*
#
#
*
0
*
#