Telular Phonecell SX5T CDMA2000 - Manual (Page 6)

Phonecell ® SX5T CDMA2000 2 User Manual
Connecting an SX5T Model With a Power Supply
Your SX5T has either a Power Supply (part #74007301) or a Battery Backup Unit
(BBU; part #74006803). If your unit uses a Power Supply, please follow the instructions
below to connect the SX5T to your AC power. If it uses a BBU, please see “Connecting an SX5T
Model With a BBU” on page 4.
To connect an SX5T model with a Power Supply:
1. Connect the barrel connector of the power supply to the AC power input receptacle of the SX5T
- see Figure 3.
2. Plug the AC power cord into the power supply.
3. Plug the AC power cord into the AC Power outlet.
4. Check the cellular signal strength and move the unit until you achieve the best signal
possible - see LED Status Indicators on page 8 for more information.
Figure 3 – Connect the SX5T to AC Power.
AC Power
AC Power
Position
Battery
Position
AC Power Cord
Power
Supply
Barrel Connector
AC Power
Input Receptacle
Hint: If there are no emergency batteries in the SX5T, it will only power on if the AC/Battery switch is in the
AC power position -
see Figure 5 on page 3 for a detailed view.