Sending/receiving a pc fax – Telular Phonecell SX5T CDMA2000 User Manual
Page 32
Phonecell
®
SX5T CDMA2000
28
User Manual
Sending/Receiving a PC Fax
A PC with a serial, USB, or phone (RJ11) connection to the SX5T can send and receive faxes using
the SX5T. Your account with your service provider must support circuit switched data transfer for the
SX5T’s PC fax function to work.
Set Your Computer’s Port and Modem Speeds for PC Fax
To send or receive faxes, you need to set the port and modem speeds your computer uses for the
SX5T to 19200 bps. See Windows XP/2000 Setup (page 18) or Windows 98 Setup (page 24) for
details.
Choose Fax Mode
1.
To receive one fax, enter
Fax Next Call
mode. Press
.
Your SX5T will treat the next incoming call as a fax, then return to normal operation.
If you are using an RJ11 port to receive the fax, you may skip the remaining steps.
2.
To receive faxes indefinitely, enter
Fax Always
mode. Press
.
(Your SX5T will treat all incoming calls as faxes. To resume receiving voice calls, you must
switch back to
Voice
mode: Press
. If you wish to make a single voice
call while remaining in Fax Always mode, press
.)
If you are using an RJ11 port to receive the fax, you may skip the remaining steps.
3.
To send a PC fax, set the Fax Port and Baud Rate, then use your computer’s fax software to dial
the receiving fax machine’s number. Whenever your software asks you what modem to use,
select the
Standard 19200 Modem
.
Choose the SX5T’s Fax Port
1.
Enter Configuration Mode – Press
<lock code>
.
2.
Select
Data Port
– Press
.
– OR –
Select
RJ11 Port
– Press
.
3.
If you selected Data Port, select which Data port to use.
Select
Serial
by pressing
.
– OR –
Select
USB
by pressing
(Windows XP/2000 only).
Set the SX5T’s Baud Rate for PC Fax
1.
Enter Configuration Mode – Press
<lock code>
.
2.
Select
Baud Speed 19200
– Press
.
Note:
If you take the phone off-hook while sending or receiving a PC fax via serial or USB cable, you will hear
a busy tone; the fax data transmission or reception will not be disrupted.
If you take the phone off-hook while sending or receiving a PC fax using an RJ11 phone jack
connection, the fax data transmission/reception may be disrupted.
#
2
*
6
3
1
*
#
#
*
0
*
#
#
1
*
5
3
1
*
#
#
0
*
5
3
1
*
#
#
1
*
7
6
*
#
#
0
*
7
6
*
#
#
*
0
*
#
#
4
*
#
#
7
*
#
#
5
*
#
#
1
*
#