Toshiba 32A3500T - Manual (Page 13)

13
Getting started
• To return to the previous menu, press
M.
• The U/ u function as the Program position
PB/ Pb when there is no menu display on the
screen.
• The I/ i function as the Volume 2+/2– when
there is no menu display on the screen.
• In the PC input mode, PC Setting appears in
the SET UP menu (- page 30).
• In the 480i or 576i input signals mode, you
can select the Cinema mode in the PICTURE
menu (- page 19).
• When you use the color management function
(- page 19), you can select the Base color
adjustment in the PICTURE menu.
Watching TV programs
Selecting the menu language
Choose from 9 different languages (English,
Chinese (CS), Malay, Thai, Vietnamese, Russian,
Arabic, Persian or French) for the on-screen
display.
1
Press
M, then press I or i to display SET UP
menu.
AV connection
Manual tuning OK
OK
Auto tuning OK
Language
SET UP
English
OK Picture position
MENU Back Watch TV EXIT
2
Press u or U to select Language.
3
Press I or i to select the desired language.
Changing the program position
1
Enter the desired program position number
using the Number buttons on the remote
control.
For program positions below 10, use 0
and the required number e.g., for program
position 1.
2
You can also change the program position by
using PB or Pb.
The program position will be displayed on
the screen with the Mono/Stereo/Dual audio
status.
Note:
The program position selection change between
different format channels takes several seconds.
Switching between two program positions
You can switch two program positions without
entering actual position number each time.
1
Select the first program position you want to
view.
2
Select the second program position with the
Number buttons (0-9).
3
Press
:. The previous channel will be
displayed.
Each time you press
:, the TV will switch back
and forth between the two program positions.
Displaying the on-screen information
1
Press
K to display the following on-screen
information.
ABCD 4 Stereo
The information will disappear in 6 seconds.
• Program position or external input mode
selected
• Program skip on/off information
• Label (if set)
• Mono/Stereo/Dual audio status
2
To erase the display instantly, press
K
again.