Toshiba 32A3500T - Manual (Page 30)

30
Connecting your TV
To connect a PC to the HDMI terminal on the
TV:
When connecting a PC to the HDMI terminal on
the TV, use an HDMI-to DVI adapter cable and
analog audio cables.
If connecting a PC with an HDMI terminal, use
an HDMI cable (type A connector). Separate
analog cables are not necessary.
TV back view TV back view
Computer
Audio cable
for PC-to-TV
connection
COMPONEN
VIDEO INPU
PC/HDMI1
(AUDIO)
P R /C R
R
R
R
L
L/MONO
AUDIO
AUDIO
(3)
The HDMI input can accept and display VGA,
480i, 480p, 576i, 576p, 720p (50Hz/60Hz), 1080i,
and 1080p signal formats.
Notes:
• The edges of the images may be hidden.
• If receiving a 720p, 1080i, or 1080p signal
program, PC mode scales the video to display
the entire picture within the borders of the
screen (e.g. no overscanning) (- page 17).
Using the PC setting
• In the PC input mode, you cannot select the
Color, Tint, Sharpness, Black stretch, MPEG
NR and DNR in the Picture setting menu, 3D
Color management, Base color adjustment,
Active Backlight Control and Cinema mode
(- page 18, 19).
• In the PC input mode, the Manual setting
(- page 23) is not displayed.
• First press o until the video input mode list
appears on the screen, then press u or U and
Q in order to select the PC input mode (-
page 23).
• This function may not be available for some
signal or if no signal is received.
• The optimum points of the clock phase
and sampling clock adjustments may be
incomprehensible according to the input
signals.
Adjusting the picture size/position
1
Press
M, then press I or i to display the SET
UP menu.
AV connection OK
Language
SET UP
English
OK PC Setting
MENU Back Watch TV EXIT
2
Press u or U to select PC Setting.
Language
SET UP
MENU Back Watch TV EXIT
English
AV connection OK
PC Setting OK
3
Press
Q to display the PC Setting menu.
Ver tical height
Ver tical position
MENU Back Watch TV EXIT
0
0
0 Clock phase
Horizontal position 0
PC Setting 1/2
Horizontal width 0
0 Sampling clock
4
Press u or U to select an option you want to
adjust. Press I or i to adjust the settings as
required.
Horizontal position 0