Toshiba 32A3500T - Manual (Page 14)

14
Getting started
Manually setting channels in the channel
memory
1
From the SET UP menu, press u or U to
select Manual tuning.
2
Press
Q to display the Manual tuning menu.
Press u or U to select the program position
you want to arrange.
5
4
3
2
1
MENU Back Watch TV EXIT
6
OK
Manual tuning
Prog. Label
Select Sort
3
Press
Q to display the breakdown menu.
Press I or i to select an item, then press u or
U to select the item as shown below.
A C E
B D F
G
MENU Back Watch TV EXIT
OK
Manual tuning
St re
1 B/G
Program
A
A. Program position selection
B. Sound system (- page 33)
C. Color system (- page 33)
A : Automatic (factory set), P : PAL,
S : SECAM, N4 : NTSC 4.43 (MHz),
N3 : NTSC 3.58 (MHz)
If the color of a certain channel is
abnormal, the automatic color system
selection (A) may have malfunctioned, or
sound system selection is wrong. In such
a case, select another color and/or sound
system (- page 33).
D. Program position skip selection
Press
u or U to turn the program position
skip option on “8” or off “(”.
The program position will then be skipped
when you select channels with PB or Pb.
The “8” mark will appear beside a
program position number when you use
the Number button on the remote control.
E. Channel search operation
Press
U to search up the band or u to
search down the band.
Press u or U repeatedly until your desired
channel is displayed.
When a station/satellite is found, it will be
displayed.
NEVER PRESS ANY OTHER BUTTONS
WHILE THE SET IS TUNING.
Programming channels into the TV’s
channel memory
• First, use the Auto tuning function to preset all
the active channels in your area automatically.
Then, arrange the preset channels with the
Manual tuning function so that you can tune
into only desired channels.
• Use the Manual tuning operation if desired
channels cannot be preset with the Auto
tuning or if you would like to preset channels to
specific position numbers one by one.
Programming channels automatically
1
From the SET UP menu, press u or U to
select Auto tuning.
2
Press
Q to display the Auto tuning menu.
MENU Back Watch TV EXIT
Auto tuning
EXIT for no change .
Press OK key to star t. !
3
Press
Q to start the automatic search.
The search will begin for all available stations.
Searching
Stop
Pos :2
Auto tuning
EXIT
The slide bar will move along the line as the
search progresses.
If you make a mistake, simply repeat steps
1-3 to start again from the beginning.
4
When the automatic search is completed,
the TV will automatically return to the first
program position.
5
Press PB or Pb to view the programmed
position.
Note:
When you preset the program channel which
sound of broadcast transmission system adopts
“M” system, the sound system may not be tuned
correctly if the radio waves transmit badly. At that
time, preset the channel by Manual tuning.
The countries such as Myanmar, Brazil, Chile,
Colombia apply to this case. See page 33 for
more details.