Toshiba 32A3500T - Manual (Page 19)

19
Using the TV’s features
Adjusting the color management
You can adjust the picture color quality by
selecting from 6 base color adjustments : Red,
Green, Blue, Yellow, Magenta or Cyan.
1
From the PICTURE menu, press u or U to
select 3D Color management.
2
Press I or i, then press I or i to select On.
3D Color management On
3
Press
Q, then press u or U to select Base
color adjustment.
4
Press
Q, then press u or U to select an item
you want to adjust.
Hue
MENU Back Watch TV EXIT
Red
Blue
Green
Yellow
Magenta
Cyan
Saturation Brightness
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Reset OK
Base color adjustment
5
Press i, then press I or i to select Hue,
Saturation or Brightness.
Red
Brightness
0
Hue
0
Saturation
0
6
Press u or U to adjust the settings as
required.
Notes:
• If you select color management Off mode, this
mode is not available.
• In the PC input mode (- page 23), this mode
is not available.
Resetting the base color adjustment
The Reset function adjusts the base color
adjustment to the factory settings.
1
From the Base color adjustment menu,
press u or U to select Reset.
2
Press
Q.
Using the active backlight control
In order to improve screen visibility, the active
backlight control sets the screen brightness
automatically during dark scenes.
1
From the PICTURE menu, press u or U to
select Active Backlight Control.
2
Press I or i to select On or Off.
Using the cinema mode
A movie film’s picture runs at 24 frames a
second, whereas movie software such as DVD,
etc., that you enjoy watching on television at
home runs at 30 (NTSC) or 25 (PAL) frames a
second. To convert this signal to reproduce a
smooth motion and picture quality, select the On
mode.
1
From the Picture settings menu, press u or
U to select MPEG NR on the 2nd page.
2
Press I or i to select Off, Low, Middle or
High.
MPEG NR Low
Note:
In the PC input mode (- page 23), this mode is
not available.
Activating the DNR (Digital Noise
Reduction)
If the receiving signal is weak and the picture is
blurry, the picture may be improved when using
this function.
1
From the Picture settings menu, press u or
U to select DNR on the 2nd page.
2
Press I or i to select Auto, Off, Low, Middle
or High.
DNR Auto
Note:
This function is available for 480i and 576i
signals.
Selecting the color temperature
You can change the tone of the picture by
selecting from three preset color temperatures:
Cool, Normal or Warm.
1
From the Picture settings menu, press u or
U to select Color Temperature on the 2nd
page.
2
Press I or i to select mode you prefer.
Color Temperature Cool
Cool : Lends a blue hue to the picture.
Normal : Neutral
Warm
: Lends a red hue to the picture.