Toshiba 32A3500T - Manual (Page 21)

21
Using the TV’s features
Selection I Pressing i
Bass weaker stronger
Treble weaker stronger
Balance decreases the
right channel decreases the
left channel
Using the SRS WOW ® surround sound
SRS WOW ® is a special combination of SRS
Labs audio technologies that creates a thrilling
surround sound experience with deep, rich bass
from stereo sound sources. Your TV’s audio
will sound fuller, richer and wider. SRS WOW
®
consists of three features; SRS 3D ® , SRS
FOCUS ® , and SRS TruBass ® , being turned on.
1
Press
M, then press I or i to display SOUND
menu.
Treble
Balance
WOW
Bass
Dual
MTS
SOUND 1/2
Auto
Dual 1
0
0
0
OK
Back Watch TV MENU EXIT
2
Press u or U to select WOW, then press Q.
3
Press u or U to select an item you want to
adjust, then press I or i to adjust the settings
as required.
MENU Back Watch TV EXIT
WOW
TruBass High
SRS 3D Off
FOCUS On
SRS 3D: To turn the surround effect On or
Off.
FOCUS: To turn the vocal emphasis effect
On or Off.
TruBass: To select the desired bass
expansion level (Off, Low or High).
Notes:
• If the broadcast is monaural, the SRS 3D
®
effect does not work.
• WOW, SRS and l symbol are trademarks of
SRS Labs, Inc.
• WOW technology is incorporated under license
from SRS Labs, Inc.
• The SRS WOW ® effect is active only when the
sound outputs from the speaker.
Using the stable sound
The Stable sound function limits the highest
volume level to prevent extreme changes in
volume when the signal source changes (for
example, to prevent the sudden increase in
volume that often happens when a TV program
switches to a commercial).
1
From the SOUND menu, press u or U to
select Stable sound on the 2nd page.
MENU Back Watch TV EXIT
SOUND 2/2
Stable sound Off
2
Press I or i to select On or Off.
Note:
The Stable sound effect is active only when the
sound outputs from the speaker.
Using the bass boost
1
Press
t to display Bass boost level.
Bass boost 70
2
While the Bass boost display is on the
screen, press I or i to adjust the Bass boost
level.
3
To turn off the Bass boost, press
t to
display Bass boost Off.
Bass boost Off
Note:
The Bass boost effect is active only when the
sound outputs from the speaker.