Topcom OGATECH OG-R400 User Manual
Page 19
OGATECH OG-R400
OGATECH OG-R400
19
ENGLISH
In the SMS list, private messages are flagged with a "p" in front of the name or number.
After selecting a private SMS, the user name appears on the screen.
•
Enter the password and confirm with OK. You can now read the SMS.
9.4.5 Sending SMSs from your personal user account
Your OGATECH OG-R400 lets you send SMSs from a personal user account. Once you
have written the SMS:
•
Select Options and then select User Name with the navigator and confirm with OK on
the left menu key.
•
Select the account that you want to send the message from, and confirm with OK.
•
Enter your password (if prompted) and confirm with OK.
•
Select Send to with navigator and press OK.
•
Enter the correspondent's telephone number, or look it up in the phonebook, and select
Send with the left menu key. If you select a “personal user account", the SMS will be sent
using your standard telephonenumber plus the user account number. E.g. If your
personal user number is "1" and your telephone number is 123456789, your
correspondents will receive an SMS from: 1234567891.
9.4.6 Deleting a personal user account
•
Select SMS and confirm with OK.
•
Select Settings with the navigator and press OK.
•
Select Users and confirm with OK.
•
Select Delete User with the navigator and press OK. All the personal user accounts
appear on the screen.
•
Using the navigator, select the account to be removed and press OK.
•
Enter the system PIN (the factory setting is 0000), and select OK. The account is deleted.
All the SMS messages received by the account are deleted; those sent from the account
are still saved in the Outbox.
9.5 ALLOCATING AN SMS TERMINAL NUMBER
It is possible for several SMS-enabled telephones to be connected up to the same line. So
that each telephone can continue to receive SMSs, they must be allocated different SMS
terminal numbers. This is network depending! To allocate a number:
•
Select SMS and confirm with OK.
•
Select Settings with the navigator and press OK.
•
Select Terminal Number with the navigator and press OK.
•
The number "0" is pre-set. To change it: Enter the preferred number (from 0 to 9) and
confirm with OK.
If you have already created personal user accounts, your OGATECH OG-R400 will not allow
you to allocate a terminal number that corresponds to an existing user number. If two SMS-
enabled telephones connected up to the same line have the same terminal number, neither
will be able to receive SMSs. They must be given differing numbers. E.g. If you have already
created a user account with the number "3", you must allocate a terminal number other than
"3".
Messages sent from a personal user account are stored in the Outbox.
In the outbox the messages are not protected by a password.