Topcom OGATECH OG-R400 - Manual (Page 20)

OGATECH OG-R400
20 OGATECH OG-R400
If you keep the pre-set terminal number "0" in your OGATECH OG-R400 and your telephone
number is 123456789, your correspondents can continue to send you SMSs at 123456789.
If you give the terminal a number other than "0", you must tell your correspondents so that
they can continue to send you SMS messages: they will need to affix the terminal number to
your telephone number. E.g. If you give your OGATECH OG-R400 the terminal number "3"
and your telephone number is 12346789, your correspondents will need to send their SMSs
to: 13456789 3.
9.6 SET SMS ALERT TONE
Your handset can play a different melody, a morse beep or a discreet tone to announce a
new text message.
•
Select Menu and then SMS and confirm with OK.
• Select Settings and press OK.
• Select SMS Alert. and press OK.
• Scroll to Set Alert and press OK.
• Select the type of alert you want and press OK to confirm or BACK to return to the
previous menu.
• Select ON or OFF and press OK to confirm the setting.
9.7 MEMORY FULL
When the memory is full, you get the screen message "Memory Full". You can no longer
send or receive SMSs. To continue to receive SMSs, you can delete some or all of the
messages. To delete all the messages stored in the "Inbox" and "Outbox":
•
Select Menu and then SMS and confirm with OK.
• Select Delete Messages and press OK.
• Select All Messages with the navigator and press OK.
• The screen displays: All Messages: Confirm?. Confirm with OK or cancel with Back.
9.8 SMS SERVICE CENTER NUMBERS
To send and receive SMS text messages you need the telephone number of your Network’s
SMS Centre. These numbers have been pre-loaded into the OGATECH OG-R400. You can
also find these numbers on the addendum sheet mentioned per country and per operator. If
you accidentally delete the SEND or RECEIVE SMS Service Centre numbers you will need
to re-enter them in order for your SMS Service to work.
The OGATECH OG-R400 can store 1 SEND SMS Service center numbers which and 1
RECEIVING SMS Service center numbers.
9.8.1 To set the Receiving SMS Centres numbers
•
From the standby screen, press SMS to open the SMS menu.
• Scroll to Settings and press OK.
• Press OK to open Service Centres menu.
• Scroll to Receive Centre and select OK.
• The current stored number will be shown. Press Clear and enter the new number.
• Press OK to store the number.